Wyze Camera Mount: Prusa XL series Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I used Surfalex2000's camera mount and my Wyze camera mount and combined them into a new mount!
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 151
- Wydruki
- 2
- Wyświetlenia
- 826
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I used Surfalex2000's awesome camera mount with the t-nut part to secure the camera, and combined it with my Wyze cam mount to make a new fixture that should be compatible with multi-head XL printers!
This is also (mostly) compatible with Voxel3D's EnXLosure. The wyze cam sits close enough to the polycarbonate sheets that you don't get a glare, and the mounting and support designed by @Surfalex2000 make it so that you can pop the camera off quickly to open the left-side door, without issue!
This could benefit from a cable organizer to run along the top of the side on the XL, maybe I'll add that in the future. You can likely just mirror this to mount it on the other side, should work the same.
Printed with grid supports, 25% infill, .2mm, PETG. See included photo for print orientation that worked best for me, print time was about 1.5hrs with Input Shaping.