Bottom panel "L" cut outs for Original prusa enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I chose to make a totally necessary mod to my Original prusa enclosure by filling in the "L" cut outs.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 52
- Wydruki
- 3
- Wyświetlenia
- 312
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I chose to make a totally necessary mod to my Original prusa enclosure by filling in the "L" cut outs.
I used PETG at 100% infill on 0.2mm layers.
Simply Mirror the model about the X or Y axis for the Front piece.
Give it time to cool completely before removal as it is thin and will easily warp.
Remove the screws to install, don't reinstall with to much force or you will deform the part.
If it does not fit feel free to leave a comment, or download the fusion 360 model and edit sketch 2 to make the extrusion fit into the cavity on the enclosure.
If you are installing this after your printer…. good luck.