54mm Coffee Portafilter Wall Mount / Shelf specifically for Breville/Saga
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by the talented design by jootoole (https://www.thingiverse.com/thing:5214891). Made specifed for…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 608
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by the talented design by jootoole (https://www.thingiverse.com/thing:5214891).
Made specifed for Breville/Saga Barista series, BES870, 872, 878, or other 54mm portafilters machines (not tested).
- 2 slots for portafilter.
- 2 slots for tamper/distributing tools
- a slot for brush tool
The variant 2 (Main body 3.stl) is specifically for the following printed tools:
- Coffee Bean Measuring Bowl/Funnel (https://www.printables.com/model/315421-coffee-bean-measuring-bowlfunnel)
- Sage/ Breville Barista Dosing Funnel (https://www.thingiverse.com/thing:5254601)
Highly recommended these two printed tools.
The sizes are made out of tools of what I own (Barista Pro / BES878).
There is another separate wall mount for the buskets, 3 slots in total.
Mounting method: specified slot for up to 18mm wide double-sided tape.
Assembly with printed 5 dowel pins and glue.
Print guide:
both printed vertically
- Main shelf: no support needed; 3-4 walls recommended; infill at your wish
- Busket shelf: support needed for the numbers; apply brims if needed
Check my other thing 51mm Coffee Portafilter Wall Mount / Shelf (https://www.thingiverse.com/thing:5701028) if you are a user of Delonghi EC680/685/885.
Category: Kitchen & Dining