Tapo C210 pipe mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount to fix a Tapo C210 camera to a 16mm pipe
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 85
- Wydruki
- 1
- Wyświetlenia
- 542
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
A mount to fix a Tapo C210 camera to a 16mm pipe.
The mount has an inner diameter of 16.5mm to compensate for printer tolerances.
Add a small piece of rubber when fixing the mount to achieve a tight hold.
Designed to be used with M3x6 screws and M3x4 inserts.
Supports are only needed for the Tapo mount upper projections.
Update (V2 - Replaceable MountingPlate)
Over time, the thin locking tabs that hold the camera can snap due to plastic fatigue. To avoid reprinting the entire MountA piece when this happens, I redesigned it so you can screw in a separate MountingPlate (pair it with the original MountB).
If the tabs ever break, you only need to reprint this small piece and swap it.
Both MountA-V2 and MountingPlate also use the same M3x6 screws and M3x4 inserts.
Bonus: this new version requires no supports at all!