Ender 5 - MGN12H Rail Mount for MicroSwiss DirectDrive Extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to mount a MicroSwiss DirectDriver Extruder + Hotend with V-Rollers onto a top mounted MGN12H linear rail sled.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is technically not a remix of the original part as I remodeled it from zero, but I strongly followed the design of the original part :)
I have the MicroSwiss DirectDrive + AllMetalHotend assembly for V-Rollers and wanted to use it with linear rails.
Additional materials needed:
5x M3 Bolt (4 for MGN12H Carriage and 1 for Extruder)
2x M5 Bolt (for Extruder - M5 Screws can be salvaged from the V-Roller Bearings)
To help my design approach, I also used the 3D representation of the MicroSwiss DD: https://www.printables.com/de/model/116678-microswiss-ender-5-directdriveallmetalhotend-assem
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.25mm
Infill:
70%
Filament: DuraPro ASA Black
Notes:
Should print well with PETG or ABS/ASA.
Consider using ABS/ASA if you have a heated chamber,
Post-Printing
To ease mounting, screw the M5 Bolt once into the part before assembly, this will self-tap the hole.
Note: Don't screw it in and out too fast as friction could melt the material :)