Removable Universal Storage System for Cutlery or other stuff :)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simle system to store your stuff and easily take it from the wall to other places.
- Ocena
- 5 / 5
- Polubienia
- 129
- Pobrania
- 217
- Wydruki
- 1
- Wyświetlenia
- 1152
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Heyho
I thought about how to organize cutlery well. I think most of the solutions for drawers are quite good :)
So here I have a solution for other places where you want to store your cutlery or other things.
For example, on the wall in a self-built van or in drawers or simply on the kitchen wall.
Of course, the system is so universal that it will certainly also work well in other places such as the workshop. But I will still construct caps for it so that all the dust doesn't get in so easily.)
Hardware
As hardware you need 1-2 screws with a diameter of approx. 3.5 mm.
Scalability
All parts are scalable. However, it is important to adjust the screws after increasing/reducing the size!
3D printing
PETG is recommended as a material. But PLA should also work well. However, it could break more easily if you throw your cutlery hard into it :P
You don't need any supports.
Other Applications
This Apperature is universal. So you can use it in your kitchen, shop or at your workspace.
Work in Progress
This Design is still open to your Ideas. So feel free to comment!
