SW - Ahsoka Tano [PADAWAN] Collapsing Lightsaber (NO SUPPORTS) by-MrHan/24
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ahsoka Tano ( Padawan ) Collapsing Lightsaber
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 495
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
⚫ SW - Ahsoka Tano (Padawan) ⚫
I deleted my two collapsing lightsabers.
And I decided to start this series again to make the handle in a more accurate size.
I printed this sword at a layer height of 0.30mm. That's why I want to say For those who will print with a layer thickness of 0.15 mm, these parts will not fit exactly. And you need to enlarge the parts a bit. All deviations are set to a layer height of 0.30 mm. Thank you for understanding. :-)

➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
Follow me on YouTube for more info about what you can look forward for.
■ YouTube
➔ https://www.youtube.com/c/MrHanjak2017
■ Video
🔳 INFO 🔳
■ Steel sheet
➔ PEI
■ Nozzle
➔ 0.4
■ Layer height
➔ 0.30mm DRAFT
■ Material
➔ PLA - PrusaMent
■ Infill
➔ 15%
■ Circuit
➔ 3
■ Supports
➔ NO
■ Glue
➔ YES
🔳INFO🔳
You must check yes for this part ( 13 Green by MrHanjak 2024 )


🔳Change of color🔳
6 SilverBLACK [21.80]

7 SilverBLACK [6.80]

8 SilverRED [2.90]

9 GoldBLACK [2.30]

More models coming soon! 😉
🔳 Model created by MrHanjak 2024 🔳