MST RMX 2.5 Rear Magnet Mount Enhancement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is to widen the rear magnet mount for the RMX 2.5
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 817
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
I modified the bracket that came with the kit from amazon ($10) part.
The original bracket didn't leave a lot of room to get your fingers into so I created this in order to spread it out.
This also had a great side effect of helping prevent the body from sliding when it got bumped on corners (I'm a bad drifter).
I designed the holes directly into the model a little tight for the screws, that way I didn't need any nuts on the bolts but was able to just use the original screws into the plastic.
This was my first creation on FreeCad, if you have any recommendations you'd like to make feel free to ask.