Puzzle Cutlery Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a customizable organizer that's divided into puzzle pieces to let the user design the layout of the organizer.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 253
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is a cutlery organizer that's divided into puzzle pieces to let the user design the layout of the organizer according to their needs. The pieces are sized 50x50x50mm and take about 2 hours per piece. A piece weighs 15 grams on average. I used %10 lightning infill for shorter and lighter 3d prints. I found this to be the best infill. It makes you have no errors with your print and also makes the print time shorter.
Here are my print configurations:
Nozzle: 0.4mm
Infill Type: Lightning
Infill Percentage: 10
Supports or Adhesion: Off
Everything other than these is the same as the default Cura settings.
Model created by Stephan Sozkes. Please don't forget to like the model or give feedback so I can improve my model. Also, I'm excited to see your remixes. You can use the empty piece to create new pieces for the puzzle cutlery organizer.