RPi Camera Holder With GoPro Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model allows to attach a RPi Camera to the GoPro mounting system.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 110
- Wydruki
- 1
- Wyświetlenia
- 566
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
1.- Introduction
For 3D printing I use Octoprint running on a RPi4. When building the RPi I got also a clone RPi camera (~9 US$ then.) for being able to monitor the printer while printing with my Prusa MINI+.
Took a while till I finally designed a small holder for the camera, that I could attack to a goPro attaching system.
The model was designed in Fusion360, with the aid of a caliper in order to get the correct measurements.
The camera is a Raspberry Pi Camera Module OV5647 5MP 175 Degree Wide Angle Fisheye Lens Raspberry Pi 4/ 3 Model B Camera Module.
Explore my other Printables: https://www.printables.com/@rbid/models
2.- Printing the Model
No special requirements exist for printing this model, just printed with the orientation as it is stored (vertically) to prevent the need of supports
I opted to print it using Prusament Prusa Orange PETG, for matching with the printer color.
No supports are needed to get well printed.
| Printer | Prusa MINI+. |
| File | soporte-rpi-camera-v4.3mf |
| Print Time | 52min |
| Filament used | 3.46mt (10.6gr) Prusa Orange Prusament PETG. |
| Layer height | 0.2mm. |
| Printer Nozzle | 0.4mm. |
| Perimeters | 3 to enforce walls around the holes. |
I have upload the binary BGCODE file for a Prusa Mini+ as well. (Requires newer firmware in the printer for accepting the binary GCODE)
Feel free to use the one that suits you best.
3.- Change Log:
- Upload: 2024-01-12: Initial Version.
4.- Last Words
Please don't forget to ★ Rate and ❤ Like
Post your Makes to earn Prusameters!
Do not hesitate to ask questions, feedback is essential to making better models.
You are kindly invited to follow me to get updated when upload new models.
Happy printing & Greetings from the Galilee.
Hope it was not TL;DR