1 / 1
QIDI XMAX 3 Exhaust 3" Fan Hose Adapter — zdjęcie 1

QIDI XMAX 3 Exhaust 3" Fan Hose Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a 3" hose adapter for the QIDI XMAX 3 and a corresponding low profile window exhaust.

Ocena
5 / 5
Polubienia
28
Pobrania
187
Wydruki
1
Wyświetlenia
894
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a 3" hose adapter for the QIDI XMAX 3 and a corresponding low profile window exhaust.  The window exhaust (and spacer) were designed specifically for my window, so likely you'll need to do some work on it if you plan to use it instead of a dryer window kit.

The printer side connects via the normally screw holes. You may need longer screws but I was able to attach it with the existing.

Printer vent needs no support, the window vent, you'll want to support the lip area and block supports on the rest of the model. I used ABS for the material.

Tagi