1 / 5
CR10-S Filament Sensor Teflon PTFE Bowden Tube Guide — zdjęcie 1
1 / 5

CR10-S Filament Sensor Teflon PTFE Bowden Tube Guide

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This clips on to the stock CR10-S filament sensor, and allows a PTFE tube coupler to screw in to the input side. You…

Ocena
0 / 5
Polubienia
2
Pobrania
25
Wydruki
0
Wyświetlenia
263
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Share Alike

(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs )

This clips on to the stock CR10-S filament sensor, and allows a PTFE tube coupler to screw in to the input side. You can find the coupler here: https://www.thingiverse.com/thing:2755127

This serves a couple of purposes. Primarily, it prevents wear to the filament sensor housing by guiding the path of the filament with a length of PTFE tube on the input. It also helps reduce air exposure to humidity sensitive filaments like PETG and Nylon by keeping the filament enclosed on its way from your dry box.

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/3XxlCKJPTjA

Print Settings

Printer Brand:

Creality

Printer: 

CR-10S

Rafts:

No

Supports: 

No

Resolution:

0.4 nozzle x 0.2 layer

Infill: 

30

Filament: Amazon Basics PETG Green


 

Notes:

 

Print threaded input side down with a brim so you get good bed adhesion

 

 

 

Category: 3D Printing

Tagi