1 / 2
Briss Fang ADXL345 (sonic pad resonance sensor) mount — zdjęcie 1
1 / 2

Briss Fang ADXL345 (sonic pad resonance sensor) mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A mount to add a Creality ADXL345 resonance sensor (e.g. for the Sonic pad) to the Briss Fang shroud.

Ocena
0 / 5
Polubienia
2
Pobrania
20
Wydruki
0
Wyświetlenia
224
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Mount for the Creality ADXL345 sensor. Needs two M3 brass inserts (short ones), to fasten the sensor to the mount. Mine was printed in PLA at 0.3 mm layer height with a 0.6mm nozzle. Mounts on top of the Briss fang, under the fan (or the original 5015 mount I remixed this from). 

Tagi