Zelda Triforce 2D
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2D model variant of Triforce.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 278
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
Hello all,
I built this STL model and printed on my Ender 3 max neo.
I just put on photo frame and I sure look pretty cool.
I let my own configuration just in case you want to print or take as guide.
Material: PLA
Infill
infill: 100%
infill pattern: Rectilinear
Layers and Perimeters
Bottom solid layers: 3
Layer height: 0.1 mm
Perimeters: 3
Top Solid Layers: 4
Speed
Infil: 80 mm/s
Perimeters: 40 mm/s
Small perimeters: 40 mm/s
Solid infill: 40mm/s
Top solid infill: 40 mm/s
Note: this module contain a lot of pieces that are not connected so I suggest use a plate to printed over them or just try to use a creative method to transfer into desire place. I use two side tape and put into backplate of the photo frame and looks pretty cool, but this just an idea. I don't want to add connectors because I feel looks ugly in some way.