Dial Indicator mount for Ender 3 S1 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design was made to mount the Harbor Freight 1" Digital Indicator to the side of the Ender 3 S1 Pro extruder.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 214
- Wydruki
- 0
- Wyświetlenia
- 893
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This was made specifically to mount the Harbor Freight 1" Digital Indicator on the Ender 3S1 Pro. It should work on all Enders that use the same extruder. Can be used to measure either Z-axis movement or for leveling the print bed. Please note that the stock leveling locations in the firmware will not work with this mount. On the side closest to the control screen, the dial indicator will be off the print bed. You can either move it manually, or find the correct locations with a terminal program (e.g. Pronterface).
Design was intended for use with a M4 bolt and nut as well as the stock screws on the side of the extruder as shown in the pictures.
By using this item and attaching it to your machine, you accept the risk of any damage that could occur as a result of its use.