Box for Headphone Amp with Input Switching
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a box designed to house the excellent DIY RE "HC1 Headphone Amp" and act as a switch between two input sources.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 268
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
This is a box designed to house the DIY RE "HC1 High Current Headphone Amp" a brilliant little ($10) headphone amp from the folks at DIY Recording Equipment. I've also designed it to be a two in, one out switch so you can feed two audio sources on TRS jacks into the back and switch between them. I also added a XLR pass through just for kicks.
Here's some links to the parts I used, however you can swap these out for whatever you want if you don't mind resizing some holes.
DIY RE Headphone Amp Kit - https://www.diyrecordingequipment.com/collections/studio-essentials/products/hc1
Any two position switch, I used one like this - https://www.altronics.com.au/p/s3032-6-pole-2-position-wafer-rotary-switch/
With a chicken head style knob like this - https://stompboxparts.com/knobs/chicken-head-knobs/
3 pin XLR chasis mount female - https://www.swamp.net.au/neutrik-nc3fd-lx-female-xlr-panel-mount-connector
3 Pin XLR Chasis mount Male - https://www.swamp.net.au/neutrik-nc3md-lx-female-xlr-panel-mount-connector
I sized everything for M3 heat set inserts - https://core-electronics.com.au/brass-heat-set-inserts-for-plastic-m3-x-4mm-50-pack.html
Any questions hit me up - Good luck!