Table lamp base (plug part) for some noname like IKEA Tertial
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is base for some generic no-name lamp being similar to IKEA Tertial, its plastic and breaks easy
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 412
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
This is the base for the table lamp with springs really similar to IKEA tertial, but here joints are from plastic instead of the metal, so plug, that is inserted into base breaks easy. Last photo is of original part.
Part is oriented already for the better durability. Uses all original M4 hardware and do not require anything else.
Supports required, but only in one place, example attached in photos.
The one on the photo have been used for a month and didn't break, unlike original after a week
Print params:
- Material - PETG recommended, with lower cooling, but you can try to get away with some other
- Supports: yes, but only displayed on screenshot
- Perimeters: 5+ for durability
- Infill: 40% or more
- Brim: if you have bed adhesion issues
- Layer height: 0.2-0.25