Sharkie Dual Extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is based on Left Shark Monochrome by cerberus333. I pulled the original model in to MeshMixer and extracted…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 283
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
This model is based on Left Shark Monochrome by cerberus333. I pulled the original model in to MeshMixer and extracted sections to be printed using a dual extrusion printer.
I've included a body with and without MeshMixer generated supports. I had luck printing the body with supports, print support-less at your own risk!
I've documented my workflow in this blog post: http://thenewhobbyist.com/2015/02/printing-extrusion-confusion/
As well as the accompanying youtube tutorial here: https://www.youtube.com/watch?v=LSCr0SnwA-Q
Instructions
- Assign one model to each extruder
- Awkwardly dance
Category: Creatures