Creality Laser Y Rotary Kit Pro Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extensions to raise the Creality Laser Rotary Kit Pro 15mm for Tumblers with handles
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 301
- Wydruki
- 1
- Wyświetlenia
- 2053
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Parts needed to raise your Creality Rotary Kit Pro 15mm to allow tumblers and cups with handles to move freely around laser.
Parts required:
4 Each of M4 25mm long flathead screws. (I started with 40mm and cut them down to 35mm but have since replaced them with 25mm long)
1 each of M3 25mm long machine screw and M3 nut.
Keep the black cap for the tail stock to clamp it in place.
Glue the knob onto the m3 screw head with the nut threaded all the way to the head and make sure to get the super glue into the nut threads a little bit too to lock it in good. (see picture)
When engraving a tumbler with a handle the center of your image space is the Top of the cup with the handle facing down. Mark your cup 180 degrees from the handle and place your laser center there. You can align your images yourself for the sides and set your unengravable areas in your own laser program.
If you want a taller riser set, let me know in the comments and I can make them quickly.