Lechuza Yula Plant Bag Bottom Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tray to give small orchid plant pots a better stand in Lechuza's Yula Plant Bags
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Lechuza's Yula Plant Bags have unique watering system, where sticks with a wick are pushed into the plant pot from beneath. The wick reaches in the water reservoir below, nourishing the plants. This doesn't quite work with store bought orchids - due to the loose ‘soil’ - but as they don't need a constant water supply, I still wanted to place them in here, without using the watering system.
The inbuilt rests only offer a very unstable positioning for smaller plant pots (approx. Ø 9cm), thus the need for a little tray ontop of thos rests.
I halfed the tray due to size restraints of my Anycubic Vyper. Simply print it twice for a whole tray. I used Prusa PETG clear, but PLA will work just as well.