UPDATED: Sony SRS-XB33 Shower Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Speaker Shower Holder
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 56
- Wydruki
- 1
- Wyświetlenia
- 310
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
I designed this model for my speaker (Sony SRS-XB33) as a shower holder. I just thought I could share this model with the public, as you have the same speaker. When you are inserting your speaker, use extreme caution because it is very tight. I recommend filing on "the cage" face to allow tolerance openly and insert easily.
Infill: 50%, 100% with gyroid
Layer Height: 0.30mm
Material Filament: LayerLine by HSP PLA
With tree support
I am providing you with files - step, and 3mf. Feel free to edit on part as well.
UPDATED 07/2024:
As this model (the black one in the picture) was first released, I was using it a lot until this month, when the “cage” of this part decided to give up because I believe the cage was neither too small nor strong enough. I pulled back to the model, then increased thickness. Reprinted (the red one in the picture), it seems much better.