Voron Switchwire probe deployer + Random Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Main things here is the switch probe, but I also included my z extenders and top blocks which both extend the z height.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 593
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
The switch probe uses two pulleys, a mini keybak, and magnets to create a mechanism where if a belt is pulled then the probe is deployed but when the probe is deployed the belt can still retract. The printer uses a lever at the top of the z travel to pull the belt and deploy the probe, and then the bed pushes the probe back down. I did not save the model of the lever at the top of the printer.
In order to user this probe with sensorless homing, I needed to first do a sensorless home of x y, then sensorless home z against the top of the z travel, then the printer has enough reference points to deploy and find the probe, at which point it can re home z based on the probe for better accuracy.