Drawer Divider Brackets for 1/4" Boards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket set for press-fit joints between cut-to-length wood boards. Try 2.5" x 1/4" wood for drawer dividers.
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 165
- Wydruki
- 4
- Wyświetlenia
- 1384
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Press these brackets over the top of the joints between ¼" thick wood boards for quick and easy drawer dividers. I've used these for several kitchen drawers and they've been working well for for 3 months at the time of posting. Only tools required are to measure and cut the wood to length.
This set includes:
- Cross (+) Bracket
- T Bracket
- L Bracket
- End Bracket
Nothing gets glued together, or permanently attached to the drawer itself. The design does rely on a tight fit to put some compression on the boards within the drawer. The “End Bracket” acts as an optional spring so the boards don't need to be cut to the perfect length.
Source Fusion 360 files are attached. I'd be curious to see if anyone ends up making these out of wood filament (or at least a subtler color than white).