1 / 1
EnderNG Linear Rail Mod (Beta)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Version 2 is now released with fixes noticed in Version 1. Linear rail mod for the EnderNG Beta
- Ocena
- 2 / 5
- Polubienia
- 117
- Pobrania
- 499
- Wydruki
- 2
- Wyświetlenia
- 3980
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 26)Remiksy (1)Kolekcje (126)Powiązane
BOM: (Not complete)
- 2x 300mm MGN9H linear rails - z1 preload
- 1x 300mm MGN12H linear rail - z1 preload
- 1x 330mm 2020 V slot extrusion or 330mm lightweight X gantry for Voron 250
- Version 2 will require 4 Gates or Mellow 20T GT2 Toothed Idlers (15mm OD)
Please look at the CAD for additional hardware, I will take the time soon to go through all the changes.
Version 2 Changes:
- Incorporated the new updated Motor Mounts for the EnderNG, Version 1 motor mounts will work with Version 2 if you do not have the updated CAD.
- I will add the updated endstop to Version 1 Motor B.
- Relocated the Y-endstop to Motor B to gain 7mm of clearance.
- Fixed belt routing issue - requires 15mm OD toothed idlers (Gates or Mellow recommended)
- Added 2x 20T toothed Idlers to the front idlers due to belt orientation
- Motor B mount is now 3 pieces to prevent issues with printing.
Potential Remix: Voron belt spacing to allow for plug and play carriages, this current mod uses the Ender3NG project's belt spacing. That will require additional carriages to be modified to fit this mod.
Stealthburner Carriage: https://www.printables.com/model/753045-ender-3-ng-linear-rail-mod-x-carriage-beta