Duotight/John Guest Push Fitting Mounting Clips (9.5mm, 3/8")
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple set of brackets to mount Duotight or John Guest style push fittings.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 1130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
A simple set of brackets to mount Duotight or John Guest style push fittings.
These fittings are commonly used in home brewing, RV water lines, and air lines. I needed quite a lot of these when I was upgrading the gas on my kegerator, and wanted something to fit my use case.
The brackets are suitable for straight, right angle and tee connectors, up to 9.5mm (3/8"). There is an included 10mm spacer for both brackets types, which matches the Kegland inline gas regulator outlet height.
Printed in ASA at 20% infill, they're quite durable. The single brackets can be printed on their sides with supports, and the right angle brackets need to be printed with their mounting surfaces to the build plate and supports on.