1 / 2
MINI-z-top für Prusa Mini Sherpa Extruder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update for Prusa Mini Sherpa Extruder
- Ocena
- 4,889 / 5
- Polubienia
- 37
- Pobrania
- 161
- Wydruki
- 12
- Wyświetlenia
- 1618
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 12) (Komentarze: 27)Remiksy (0)Kolekcje (59)Powiązane
If you have read the instructions, you will know that you have to point the motor forward, otherwise it will get stuck at the top of the Z-Top and at the latest during the self-test.
I changed the Z-Top so that this no longer happens and I can leave the Sherpa extruder mounted as shown in the pictures without it getting stuck on top.
However, I installed an E3D V6 and have the sherpa_mini_prusa-mini_mount
ing_bracket adapted, unfortunately I cannot guarantee whether it will be the same with the original hotend.