Cyberpunk 2077 Johnny Silverhand's Malorian Arms 3516 screw assembly and more accurate details
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tuned version of the original cool model, which you can assemble with screws only. Also FDM printable even on Prusa Mini
- Ocena
- 4,714 / 5
- Polubienia
- 823
- Pobrania
- 2838
- Wydruki
- 7
- Wyświetlenia
- 17 184
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Assembly is a bit difficult because it has to be screwed together in a specific order, but I made a video about it. I hope it's helpful.
Most of the models in the All.3mf file are equipped with support and seam and oriented to fit even a Prusa Mini. (in prusa slicer) (new model versions need to be equipped with the older ones support and seam)
Support suggestion: use “on build plate only”: organic on the 2 big parts and snug everywhere else.
You can use superglue on most of the places if you want, but I like it if things can be disassembled.
Suggested screws: M3, (mostly) countersunk (first number is needed, second is optional)
- 5 mm 2+2 pcs
- 10 mm 2+1 pcs
- 16 mm 5+2 pcs
- 20 mm 5 pcs
- 20-30 mm 2 pcs
M3 Nut 6+5 pcs (You can add 2 into the grip and some to the spring)
Some kind of spring or rubber band.
Small amount of any weak glue or glue pads.
You can asseble it without a spring/rubber but there is nothing to hold the slide in place.
The main frame has 3 versions (things on the side), the rotary thing has 2 (text in/out).
You can put a bullet inside of the barrel from the back and also under the slide (it can hide the electronics)
3 or 4 pieces of electronics can be placed:
- The 2 signature LEDs can be put in the rotary thing with enough room for a battery.
- On the top of the grip there are 2 red LEDs.
- There are 2-3 LEDs in the front pod.
- If You choose to put a laser in that pod.
2-3-4 can be powered from the magazine.
Paintings:
- Magazine and the shine things: Revell enamel steel (91)
- Grip: Revell enamel satin purple red (sm 331) painted on the inside
- Everything else is the Fuse 1's own PA12's original color.
The prototype was printed entirely on Prusa Mini.
The final version was printed on Formlabs Fuse 1 and the grip was printed on a Phrozen sonic mini 8k.
If you like the model, please consider supporting the original creator and/or me.
BTC: bc1qzrppwsp9fh0evyxkf9lpmlfv7gstltuskftl9y
