1 / 15
Anet A8 Electronic Box AiO (ATX PSU, mainboard, Raspberry Pi, Dual Mosfet and LCD)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update 09/2018 : add the support for the Pi Camera. You need to fix it on the first screw in the front of the bed.…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 350
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (3)Powiązane
Update 09/2018 : add the support for the Pi Camera. You need to fix it on the first screw in the front of the bed.
Enough of messy wires. This is an All In One box for Anet A8 like for the Creality CR-10.
It includes :
- ATX power Supply
- Anet A8 mainboard
- dual Mosfet
- Raspberry Pi 3
- LCD
- cooling for the electronics boards
- spool holder (need 2 bearings)
- bases for under cooling the PSU
- some cable management inside the box
This is my first public version, thanks for support.
Print Settings
Printer:
Anet A8
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
15
Notes:
Generate supports only for the frames and the camera case.
You need 4, 6 or 8 smalls bases (support.stl) for cooling.Category: 3D Printer Accessories