Raspberry Pi PSU Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This PSU Raspberry Mount is designed to fit the standard hole dimensions for Raspberry Pi 2B, 3B and 4B. The design…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This PSU Raspberry Mount is designed to fit the standard hole dimensions for Raspberry Pi 2B, 3B and 4B.
The design has an in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting. Will include 4 3mm offset spacers to be used between the controller and the mount to allow for the controller to be raised off of the mount surface.
Mounting Hardware:
2x - M4 - 8mm bolts (secure mount to PSU)
4x - M2 - 12mm bolts/nuts (secure controller to mount)
4x - 3mm Spacers (provided by us)
Controller Information:
Standard Raspberry Pi 2B-4B
Meanwell LRS 350 - https://www.amazon.com/MEAN-WELL-LRS-350-12-Switching-Constant/dp/B07BH1FTYP/ref=sr_1_2_sspa
Meanwell LRS 600 - https://www.amazon.com/LRS-600-12-Switching-Upgrade-Version-SE-600-12/dp/B0BW2Q86XH/ref=sr_1_2
Category: Electronics