QIDI X-Max 3 Nozzle scrub holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed a holder for a nozzle scrubber.
- Ocena
- 4 / 5
- Polubienia
- 139
- Pobrania
- 483
- Wydruki
- 1
- Wyświetlenia
- 4168
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed a holder for a nozzle scrubber. The holder stays in place and fits in the gap between bed-bearingblock and printbed and is adjustabel in height and position.
The design is just the basic holder, you can mount whatever scruber you want, to your preferences. I have used a brass brush, that i cutted to size and glued to the holder.
The arm is included with a step-file so that you can modifiy it to the scruber you have.
For this design you will need four M3-thread heat-inserts and four M3 bolts + washers.
The macro programming is up to your preferences. As an example you can use it as print start command or as pause-resume command.
