1 / 5
Magnetic Car Snowboard Rack + Glove Rack (But it sucks)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Work in progress... Good idea in theory but overthought the design
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 380
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Uploading because why not
Design Ideas:
- Hold 2 snowboards with bindings facing out
- Magnetic and non stick so your boards are supported
- Help air dry gloves/hats
- Hidden Magnets (print-pause-print)
Why it failed:
- Too long to print, even on a Bambu X1C
- Too much material
- Too large (see above), magnetic forces were not strong enough to overcome moments generated at the ends
- Aesthetic design was supposed to mimic a mountain range
If you print this, you'll need:
- x3 60x10x5mm neodynium magnets
- Neoprene foam 1" self-adhesive strips