Henson Razor Shaving Station
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stand designed for a Henson razor, shaving brush, and collapsible bowl. It can frees-stand or hang on a mirror
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 568
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a stand designed for holding a:
- Henson razor (others may be compatible),
- Shaving brush
- Collapsible shaving bowl
- Your rings or anything else you want to hang.
This shaving station can be mounted on your mirror with a suction cup (thinnest diameter of 10mm). It can also stand on its own if necessary (although not recommended for regular use). Water should drain well and away from your brush and razor.
The model is designed to be printed using the following settings:
- PLA (beware of overhangs with other filaments)
- 0.4mm nozzle
- Orientation: spine laying down, prongs up.
- Supports enabled (small supports needed for printing hook overhangs)
- 1.2mm+ walls
If you like this model and found it useful, please consider clicking the “Like” button so I can eventually get some Prusa filament and prototype more things! 😉