Fein Vacuum Hose Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is to replace the Vacuum end connector on an older Fein vacuum hose. I was able to start with CLine's design…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 530
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This is to replace the Vacuum end connector on an older Fein vacuum hose. I was able to start with CLine's design 1550675 and create the remainder of the part which locks into the vacuum by measuring off of my broken part. You may need to adjust the size depending on your printer. I would suggest printing some test rings from each end to ensure fit and make adjustments in your slicer.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
38
Filament: SUNLU PETG Black
Category: Parts