1 / 1
Prusa MK4/S and Core One silicone levelling jig
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A silicone tube cutting jig to cut tube to 12mm for the Prusa MK4/S or Core One
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 547
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (23)Powiązane
A jig to help cut tubing for the silicone mod for the Prusa MK4/S or Core One
Other necessary items:
- 8x M3x14 screws (counter sunk / DIN 7991)
- Need one more if you want to replace the middle Torx screw
- 8x silicone tubing outer diameter 7-8mm, inner diameter 3mm, length 12mm
Follow the Prusa MK3 guide at: https://www.schweinert.com/silicone-bed-level-mod-prusa-mk3/
When using OctoPrint-BedLevelVisualizer:
G28 ; home all without mesh bed level
G29 ; run mesh bed leveling routine
@BEDLEVELVISUALIZER ; instruct plugin to start recording responses from printer
G29 T ; report mesh bed leveling status