Rugged Waterproof Meshtastic Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rugged and waterproof enclosure for RAK Meshtastic Devices.
- Ocena
- 5 / 5
- Polubienia
- 77
- Pobrania
- 342
- Wydruki
- 2
- Wyświetlenia
- 3791
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a ruggedized, waterproof enclosure for RAK19007/4630 Meshtastic devices. It features an external helical GPS antenna for improved reception under thick canopy conditions as well as a Fischer 102 waterproof connector for charging/ data as I could not locate any compact, easy to integrate waterproof USB C connectors.
This is an expensive feature rich build that will require some soldering for the Fischer connector.
The main body, board carrier and front cover have been printed in Polymaker PA6-CF.
The O-ring was printed in 95A TPU.
I have included a design of the socket i used to install the nut onto the Fischer connector.
Parts:
IP67 SMA Connectors:
https://www.digikey.com/en/products/detail/gradconn/CABLE-161-RF-100-A-1/9859840
Linx dipole antenna:
https://www.digikey.com/en/products/detail/te-connectivity-linx/ANT-916-CW-HW-SMA/2694126
SMA external GPS antenna:
https://www.digikey.com/en/products/detail/kyocera-avx/1002857/6049186
3700 mAh Battery:
https://www.amazon.com/gp/product/B08215B4KK
Fischer 102 0F 5 pin socket (knockoff)/ Fischer 102 0F 5 pin cable connector (knockoff):
Fischer 102.1951 sealed receptacle plug kit:
https://www.ebay.com/itm/133061804258
M3x12mm Black oxide coated stainless steel SHCS:
https://www.mcmaster.com/90348A007/
M3 threaded inserts.
M2.5 threaded inserts.
3mm acrylic rod for charging and status light pipes.
Some thin double sided tape to secure battery under the board holder.
A USB C type cable that you can cut up.