Parametric Fishing Rod Holder for boats
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stores fishing rods/poles securely in a horizontal or vertical orientation
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 183
- Wydruki
- 0
- Wyświetlenia
- 3865
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted some horizontal rod storage for inside my boat but one of my rod butts didn't fit in at least one of the commercially available rod holders.
This is a parametric model (Fusion 360) that allows you to specify spacing distance (to fit on your print bed for example) and ‘butt hole diameter’ ;)
The rigid parts I printed from ASA for UV resistance and the flex bit from TPU with minimal walls and infills. You might need to experiment with infill/walls etc to get a result you like. I'd recommend scaling the TPU down 1-2% as well.
The flex bit is slid in the back of the rigid part and held captive when the whole assembly is attached to a solid object.
NB - I'm not great at 3d modelling and if you exceed some parameters the model seems to break but it should be usable for most common sizes.