1 / 4
AirMate the Air Purifier (based on PHILIPS FY0293/30) — zdjęcie 1
1 / 4

AirMate the Air Purifier (based on PHILIPS FY0293/30)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Pretty big and pretty efficient air purifier.

Ocena
0 / 5
Polubienia
14
Pobrania
83
Wydruki
0
Wyświetlenia
1419
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Hello

I want to present my project of 3d printed air purifier - AirMate. This is based on PHILIPS FY0293/30. Assembling is simple, but requires some soldering and cable management. 

I have used duct fan EMAX 125 EBERG 218 m3h(most likely overkill, but works perfectly fine), with additional switch V7 EBERG. It has two speeds. 

When assembling whole thing, you will need to disassemble switch and glue it to the bottom of “switches” body. Do not forget to put buttons inside! 

 

***work in progress***

Tagi