Pegasus [REMIX]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a remix of @Brutal3dprints Pegasus.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 349
- Wydruki
- 2
- Wyświetlenia
- 1101
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My auntie asked me to print a Pegasus for her, but i didn't like how his wings were aligned.
I reduced the polygon-count from like 2,4M to 370k and repositioned his Wings.
I also removed his double-hump and cleaned some minor blobs.
Printed with: E-Sun PLA+ Cold White
- sticks pretty good to flat overhangs when using as support material with standard 0.2mm Top contact Z distance. I put that to 0.25mm and the supports went off really good and the overhangs on the wings look a little feathery. I like that.
Model-height: 150mm
Infill: lightning
I'm happy with it, and my auntie will be, too.
But next time i would print with 0.1mm layer height and correct retract settings :)