Marker Dice - with a twist
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIY marker dice. I don't like to have thousands of single +1/+1 markers on my board and before buying any dice I would…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 550
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
DIY marker dice. I don't like to have thousands of single +1/+1 markers on my board and before buying any dice I would need in different variations, I came up with the idea to make a twistable marker die.
Currently there are 4 halfs for power and 4 halfs for toughness (MTG).
1x Power 0 to +3
1x Power +4 to +7
1x Power 0 to -3
1x Power -4 to -7
1x Toughness 0 to +3
1x Toughness +4 to +7
1x Toughness 0 to -3
1x Toughness -4 to -7
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20
Filament:
Noyes PLA
Notes:
Turn the halves till the magic symbol is on the bottom.
Category: Dice