FAB365's Tie Fighter Outland (foldable) fixed wings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modification for the awesome FAB365's Tie Fighter Outland (foldable) model.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 736
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a modification for the awesome FAB365's Tie Fighter Outland (foldable) model. The model is free to download (!) on the Fab365 site: https://fab365.net/items/311
The original foldable wings were printed OK, but I've noticed a minor warp after the print cooled down, and the 2 halves won't align perfectly. So, I've decided to merge the parts and print the wings in one piece, following the guide posted by hankk17 on the comments section of the model.
I've included 2 versions of the design. One for just one wing, and another with both wings. Due the height and orientation of the model, I strongly suggest the use of supports when printing.
I used a Bambu Lab A1 printer, with AMS, and for the settings I've selected the 0.4 nozzle (currently equipped), the 0.16mm Optimal profile and enabled the support option (tree, auto). For printing, I have used the eSUN PLA+ white filament, printed at temperature of 220 degrees (Celsius).
Estimate time/materials:
- 1 wing - 2h37m, 18.94g;
- 2 wings - 3h38m, 34.80g.