Artemis Helix Peg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Archery release thumb button/pug
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 636
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
[2024-04-07] Did some more testing and depending on your needs, printing it at 0.16 or 0.2mm layer height works fine as well.
Archery thumb release peg replacement.
Has room to be mounted from either side (bolt-on release, or bolt-through release).
Tested on T.R.U. Ball GOAT.
Print in PLA.
ABS is possible as well, but feels sharp.
Not tested with PETG or PC
Small nozzle - 0.25mm nozzle with a layer height of 0.05mm
Default nozzle - 0.4mm nozzle with a layer height of 0.08mm
Support not needed
Larger nozzle or layer height is possible, but will affect results and feel.
NOTE: The Peg/Button has been found on Etsy and will work with vendors or Etsy itself to get it removed.
It's licensed for non-commercial use and can only be sold by RedDev3D.
Download it, print it, and enjoy it for yourself or friends. Don't sell it.