Tenstorrent e75 Fan shroud for Supermicro SC505 case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fan shroud adapter for the Tenstorrent e75 card to fit within the Supermicro SC505 case
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 381
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Just the basic adapter to work from for making a bracket for a Tenstorrent e75 AI card to get a fan snugly against the back of the card and fit within the Supermicro SC505 case. I'm assuming you've got 40x40x20mm fans lining the back of the SC505 case
It is HIGHLY recommended to print this in something like ABS which has a very high heat tolerance as the card does in fact get quite hot. Note you'll also need to make sure that you provide sufficient air movement to keep the card reasonably cool.
Using this fan shroud may void your warranty on the card, and is unsupported by Tenstorrent.