1 / 4
Filament guide with bearings for Sovol SV07 Plus
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A filament guide I designed for my SV07 plus
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 71
- Wydruki
- 1
- Wyświetlenia
- 1104
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 5)Remiksy (0)Kolekcje (30)Powiązane
I designed this as a filament guide for the Sovol SV07 Plus printer. The hole in the top friction fits pfte tube and then the filament exits the bottom and the bearings keep the filament pulling straight down. The filament exits directly over the extruder now further reducing any angles and friction points. I printed in Esun semi translucent purple petg. Everything should print in the orientation saved in the files.