1 / 3
ESC Mount for Losi XXX-CR — zdjęcie 1
1 / 3

ESC Mount for Losi XXX-CR

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small mount for brushless ESC on Losi XXX-CR

Ocena
0 / 5
Polubienia
4
Pobrania
20
Wydruki
0
Wyświetlenia
368
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Public Domain

This mounts using the existing unused holes on each side of the battery bay.  The holes in the chassis need to be tapped using a #4-40 hand tap and the bracket attached with suitable #4-40 screws.  M3 tap and fasteners would probably work too.  Once attached to the chassis, the ESC is mounted with double sided tape.  There is very little room under the XXX-CR body and this manages to just fit everything in there.