Not Benchy with modified dry dock.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I took the Benchy dry dock and modified it so that it had a "wood grain" dock, and would fit a rescaled Not Benchy.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 542
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
Description:
I saw the Benchy Dry dock, and wondered, “Why didn't anybody make a Not Benchy dry dock?”
So I made a dry dock for poor Not Benchy.
*Made for a rescaled not benchy. You can try not benchy itself, but I don't recommend it*
Instructions:
Infill pattern doesn't matter. Infill is 15%. Nozzle diameter should be 0.40 mm. Layer height is optional.
Tips:
Print with supports everywhere. (**Supports are VERY hard to remove**)
If you want smother edges, seam position should be nearest. (Doesn't matter if you are going to sand and paint)