1 / 4
Filament Swatch with transparancy check (0.2, 0.4, 1.0 & 2.0 mm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament Swatch with transparancy check (0.2, 0.4, 1.0 & 2.0 mm)
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 90
- Wydruki
- 1
- Wyświetlenia
- 400
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (29)Powiązane
I think the Bambu examples are great, but I would also like to know how transparent the filament is/can be. That's why I recreated the Bambu Swatch and installed three transparent controls.
With
- 0.2 mm
- 0.4 mm
- 1.0 mm
- 2.0 mm (=thickness of the printed part)
In my uploaded print profile, four patterns can be printed at the same time with one AMS.
Because the part is the original size, they fit into all holders that are already available on Makerworld.