AeroGarden Pod Space Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick and dirty design to cover the unused holes on your AeroGarden(s)
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 336
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This simple cover design features a groove on the bottom of the cover to keep it in place and not slide off the unused hole/opening.
Don't have a 3D Printer? You can purchase covers HERE
Each cover uses only ~3g of filament
Covering unused holes/openings will not only help reduce evaporation but will also help prevent algae growth inside your AeroGarden's tank. Which is obviously not good for plant health.
Print Settings
- Printer Brand: Creality
- Printer: Ender-3 v2
- Rafts: No
- Supports: No
- Resolution: .2 mm
- Infill: 20%
- Filament brand: Hatchbox
- Filament material: PLA
Print orientation should be done as shown below:
NOTE - These covers should be printed with a dark/black filament to prevent light from passing through it.