Logitech C270 - Cover for Smartphone Lenses (Wide Angle - Link in Desc.)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a "wide angele lens" on my C270 to see the whole build plate in my Kingroon KLP1 using my custom 40mm riser.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 100
- Wydruki
- 3
- Wyświetlenia
- 806
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When using the C270 in my Kingroon KLP1, I wasn't able to see very much of the build plate because of the C270's small FOV. I grabbed the cheapest “Smartphone Wide Angle Lens”-Kit on Amazon and made it fit onto my C270 using the Remixed Version by Daniel Vitanza, which is a improved version of the Logitech c270 webcam manual focus adjust ring. Thin & minimalistic. by Night_Gryphon - Thingiverse.
The cheap Lens-Kit I used*: https://amzn.to/3SkRHAb (I still have the fish-eye-lens left for my phone 😅)
Screw in the Macro- and 0.67x Wide-Lens (they need to be used both to work correctly) into the printed Cover. The hole has a slight chamfer to make this task easier.
Then take the camera apart: Simply pull off the original decorative cover and take out the 3 screws (keep them!). Take off the unscrewed original cover and put on the printed cover… carefully tighten the 3 screws (you can turn each screw counterclockwise until you feel the screw jump into its thread in the plastic part before fastening the screw - that way you dont destroy the thread so fast).
Now lets see if you can see all you wanna see 😉
(*Affiliate-Link)