Cable Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds 6 cables with a maximum wire diameter of 5mm. However I included the 3ds and step files so feel free to modify.
- Ocena
- 4,75 / 5
- Polubienia
- 37
- Pobrania
- 324
- Wydruki
- 10
- Wyświetlenia
- 1370
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I have made a similar design however I came across rgonclaves's which had a much better solution to the grove hence this is marked as a remix. However I have also removed the groove on one of the sides to allow for a deeper grove on the one side which holds the cables in more securely.
See Original post on thingiverse
Holds 6 cables with a maximum wire diameter of 5mm. However I included the 3ds and step files so feel free to modify to your needs.
In the 3ds I added the 2 variables "number_of_holes" and "cable_diameter" for those unfamiliar it is under(in fusion 360):
Modify>Change Parameters
This model is designed for a 15mm double sided tape I used this one
Category: Organization