OpenSX70 Cold Shoe Case v8.2 dongle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix. Knob has settings, base has cold shoe and labels, as well as stabilizing feet. Alternate design w/out cold shoe.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 525
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Update 02 May 2025: Added alternate versions omitting the cold shoe. Start with the Orca file if you are using Orca Slicer. The other .3mf are model only.
----------
Remix of https://www.thingiverse.com/thing:4440891
Modified the knob to show the selected setting on the face of the knob. Check diameter to make sure it fits your switch.
Top cover has a notch in it to point to the correct setting on the knob.
Bottom case has integrated cold shoe ideal for Reveni or small meter. Added "feet" stabilize the dongle when installed.
See print orientation image. 15-30% infill depending on your material. Ideal to print at 0.10 (knob especially), but everything else can be printed at 0.16-0.20mm (knob will depend on your material). Looks awesome in clear material!